A project-specific benchmark
For a new non-domestic building, the approved calculation compares the proposed “actual” building with a theoretical notional building. The notional building has the same size, shape and use as the actual design, but applies reference values for items such as fabric and building-services performance.
Its calculated performance sets the target emission rate and target primary energy rate for that project. Because the benchmark follows the actual building’s form and use, the target is specific to the building being assessed rather than a single fixed threshold for every development.
It is not a design specification
The notional building is a compliance device, not an alternative scheme that a contractor is expected to construct. Government material describes the reference specification as non-prescriptive: project teams can use different combinations of fabric, services, controls and low-carbon technologies, provided the actual building meets the applicable whole-building requirements and minimum standards.
This also means that copying one notional value does not, by itself, demonstrate compliance. The approved model evaluates the coordinated building as a whole.
What this means for the project team
The assessor needs reliable geometry, zoning and activity data, together with coordinated information for the fabric, glazing, airtightness, lighting, HVAC systems, controls and renewable technologies. Those inputs describe the actual building and allow the software to generate the correct notional comparison.
A BRUKL report records the resulting regulatory comparison. If the design changes, the model should be updated before products or systems are fixed on site; a margin in one area may be reduced by a change elsewhere. Early SBEM modelling makes that trade-off visible while the design can still respond.
Official sources
Published 24 March 2026 · Last updated 8 September 2026
Need advice for a specific building or project?
Discuss an SBEM or BRUKL assessment