Energy assessment guide

EPC, SAP, SBEM and BRUKL: which assessment does your project need?

A plain-English comparison of certificates, dwelling calculations and non-domestic compliance reports for owners and design teams.

Start with the building and the trigger

The correct assessment depends on whether the building is a dwelling or non-domestic, whether it is existing or proposed, and whether the trigger is sale, letting, construction, change of use or Building Regulations approval. Similar terms can describe different outputs, so the required document should be confirmed before commissioning.

The jurisdiction and project dates also matter. England, Wales, Scotland and Northern Ireland do not always use the same regulatory route, and transitional provisions can retain an earlier standard for a particular project.

EPC: the energy certificate

An Energy Performance Certificate communicates the assessed energy performance of a completed building or building unit. Domestic and non-domestic EPCs use different approved methodologies and assessor qualifications.

An EPC is commonly triggered by construction, sale or letting, subject to the detailed rules and exemptions. It is not, by itself, the complete design-stage Building Regulations calculation package.

SAP, SBEM and BRUKL

SAP is the approved calculation methodology used for dwellings under the relevant Part L route. Design-stage and as-built calculations test the dwelling against the applicable targets and support the compliance documentation and eventual on-construction EPC.

For buildings other than dwellings, SBEM is an approved simplified modelling route within the National Calculation Methodology. The BRUKL report is the compliance output from approved software, recording the model specification and results against the relevant Part L targets.

A quick commissioning test

For an existing home being sold or let, ask about a domestic EPC. For an existing commercial unit being sold or let, ask about a non-domestic EPC. For a new dwelling or qualifying residential conversion, ask which SAP design and as-built outputs are required. For a new or altered non-domestic building, confirm the SBEM or other approved modelling route and the required BRUKL reports.

Mixed-use buildings, shell-and-core projects, multiple tenancies and changes of use need project-specific review. Send the address, use, drawings, project stage and reason the document has been requested before relying on a generic label.

Need advice for a specific building or project?

Choose the right assessment
Privacy