The essential distinction
A commercial EPC rates the energy performance of a completed non-domestic building or building unit for the Energy Performance of Buildings regime. An SBEM calculation can also be used within the Building Regulations process to assess a proposed or completed non-domestic building against Part L targets.
The modelling family may be related, but the instruction, evidence, software output and regulatory purpose are not interchangeable. A request for “an SBEM” should therefore be clarified before a fee is agreed.
When a commercial EPC is required
Government guidance identifies common EPC triggers including sale, letting, completion of construction and certain modifications affecting separately occupied parts and fixed building services. The certificate normally remains valid for ten years, but the detailed requirement and exemptions must be checked for the property and transaction.
The assessor records the building geometry, activities, fabric, lighting and fixed services in approved software, lodges the certificate and produces its recommendation report. Existing-building evidence and a site inspection are important parts of the process.
When SBEM and BRUKL are used for compliance
For relevant new-build and alteration work, the design team supplies the proposed geometry, fabric and building-services specification. Approved software compares the building with the applicable notional building and produces the BRUKL compliance report.
The design-stage model should be updated when the specification changes. The as-built submission must reflect what was actually installed, supported by commissioning, test and product information as required by the applicable route.
What to send for a quotation
State whether the document has been requested for marketing, a lease, completion, building control or design review. Provide the address, building use, floor area, plans, construction date, project stage and any existing certificate or BRUKL report.
A building may need both processes at different stages. Confirming the regulatory purpose first avoids commissioning a certificate when building control needs a compliance report—or preparing a design model when the immediate requirement is a lodged EPC.
Official sources
Published 24 March 2026 · Last updated 8 September 2026
Need advice for a specific building or project?
Discuss a commercial assessment